Hotpoint VWSR4100 Washer User Manual


 
Fabric Softener Dispenser
This dispenser automatically releases liquid fabric
softener at the proper time during the cycle. To use,
follow these steps:
Make sure dispenser is securely attached to agitator.
Use only liquid fabric softener. Pour into dispenser,
using amount recommended on package.
Add water to dispenser until it reaches the
maximum fill line.
Do not stop the washer during the first spin. This will cause the
dispenser to empty too soon.
Do not use the Fabric Softener Dispenser with AUTO SOAK or
EXTRA RINSE.
Never pour fabric softener directly on clothes. It may stain them.
3
2
1
Do not pour anything into the agitator
if the top is removed.
Customer ServiceTroubleshooting TipsOperating InstructionsSafety Information
Separate for cleaning.
Cleaning the Fabric Softener Dispenser
Remove the dispenser from the top of the agitator.
Separate the dispenser cup from the cover by
grasping the top and pushing down on the inside of
the cup with your fingers. Dispenser cup will pop
free from the cover.
To clean dispenser, soak both the dispenser cup
and the dispenser cover in the following solution:
1 US gallon (3.8 liters) warm water
1/4 cup (60 ml) heavy duty liquid detergent
1 cup (240 ml) bleach
If necessary, loosen build-up with a clean, soft cloth
after soaking. Do not use a stiff brush; you may
roughen the surface of the dispenser.
Rinse and reassemble dispenser. Place dispenser
back on the agitator.
5
4
3
2
1
11