Filter
Top Products
4
Dryer Description
GB
Control panel
The front The back
Drying Guide
Programmes Guide
(VTD20 only)
Model number
(VTD20 or VTD00)
TIMER/PROGRAMMES
Knob
START
Button
Indicator
DELAY
Knob
(VTD20 only)
Control Panel
Drum
Model & Serial
numbers
Filter
The
Drying Guide
allows you to consult a user friendly
table of fabric types and load capacities.
The VTD20 also has a guide to the programmes
available.
The DELAY knob sets a delay on the dryer’s start time
(VTD20 only): rotate it clockwise until you reach the
number of hours you want to delay the start time.
If you have gone too far, turn the knob counter-
clockwise (see Start and Programmes).
The TIMER/PROGRAMMES knob sets the drying time
or programme: rotate it clockwise, never counter-
clockwise, until the indicator is pointing to the time or
programme you want to select (see Start and
Programmes).
The START button begins drying a selected
programme (see Start and Programmes).
The HEAT button selects drying temperature (see
Start and Programmes).
OUT: HIGH heat. IN: LOW heat.
The ALARM buzzer signals the end of a drying cycle
(VTD20 only).
OUT: Buzzer ON. IN: Buzzer OFF.
The ACTIVE indicator light signals that your dryer is in
use (VTD20 only). This light will glow when the START
button is pressed. It will remain on until the door is
opened or the power is turned off. This light will be on
during a delayed start programme.
ACTIVE
Light
(VTD20 only)
HEAT
Button
ALARM
Button
(VTD20 only)
Air Intake Vent
Vent Tube fitted here
Caution: Hot!
Rating plate