Filter
Top Products
9
Starting a Programme
Description Contents
Programmes
and Option
Modifiers
Control Panel
Features
Installation
Detergents
and Laundry
Care and
Maintenance
Precautions
and Advice
Something
Wrong? -
Troubleshooting
Service
GB
1. Switch the machine on by
pressing the ON/OFF Pause
button.
2. Sort your laundry into groups
by washcare labels. Load the
machine.
Close the machine door by
pushing it until it clicks.
3. Add detergent and fabric
conditioner to the dispenser
drawer.
! Refer to detergent
manufacturer’s dosage
instructions.
4. Select the programme:
- press the programme
selector button the required
number of times (see
Programme Table).
! The LCD display will change on
each press to show the
temperature of the selected programme.
5. Select any optional wash
feature(s) (see Option Modifiers)
you require by pressing the
appropriate button(s).
- Indicator lights on the LCD
display will show what you have
chosen.
6. Reduce the wash temperature of your selected
programme:
- Press the Temp button, each press will reduce the
wash temperature by 5˚C.
The new temperature will be shown in the LCD display.
7. Reduce the spin speed of your selected
programme:
- Press the Spin button, each press will reduce the
spin speed.
The new spin speed will be shown in the LCD display.
8. In addition to showing you all
information relating to your
programme selections, the LCD
display will show you the stage
of a programme in progress, the
time remaining until the end of a
programme in hours and minutes (counting down
each minute) and the door lock status.
- If ‘Time Delay’ option was selected the display will
show the time remaining until the start of the wash
programme in hours (counting down each hour).
9. Start the programme by
pressing the START/CANCEL
button for at least 3 seconds
.
! The ‘Door Locked’ indicator, will light up.
●
To stop/change a programme once the machine
has started:
- Press the START/CANCEL button until a beep is
heard.
- The machine will start to empty.
When the machine has finished emptying:
- Selector the new programme required (you may need
to add detergent).
- Press the START/CANCEL button to start the
new programme.
10. During the programme,
the status indicator lights will
show you what stage in the
programme the machine has
reached (wash, rinse, spin).
11. A short time after the programme has finished
the ‘Door Locked’ indicator will go out and you can
open the machine door.
12. Switch the machine off by pressing the ON/OFF
Pause button.
! Do not allow children to play with the machine or
tamper with the controls.
! Do not overload the machine. This may damage the
laundry and reduce the quality of the wash.
The maximum load is 7kg (Cotton).
! Do not try to open the dispenser drawer during any
programme.
! Do not try to open the machine door when the
‘Door Locked’ indicator is lit.
Starting a typical wash programme