Filter
Top Products
4
GB
As the colours of the wires in the lead may
not correspond with the coloured markings
identifying the terminals in your plug, proce-
ed as follows:
Connect Green & Yellow wire to terminal
marked E or or coloured Green or Green
& Yellow.
Connect Brown wire to terminal marked L or
coloured Red.
Connect Blue wire to terminal marked N or
coloured Black.
If a 13 amp plug (BS 1363) is used it must be
fitted with a 13 amp fuse, either in the plug
or adaptor or at the distribution board.
If you are in any doubt about the electrical
supply to your machine, consult a qualified
electrician before use.
How to connect an alternative plug:
The wires in this mains lead are coloured in
accordance with the following code:
BLUE NEUTRAL (N)
BROWN LIVE (L)
GREEN & YELLOW EARTH (E)
Disposing of the appliance:
When disposing of the appliance please remo-
ve the plug by cutting the mains cable as close
as possible to the plug body and dispose of it
as described above.
! The Washer-dryer should not be installed
in an outdoor environment, not even when
the area is sheltered, because it may be very
dangerous to leave it exposed to rain and
thunderstorms.
! When the Washer-dryer is installed, the
mains socket must be within easy reach.
! Do not use extensions or multiple sockets.
! The power supply cable must never be
bent or dangerously compressed.
GREEN &
YELLOW
BROWN
BLUE
13 ampere fuse
CROSS-BAR
CORD GRIP
! The power supply cable must only be repla-
ced by an authorised serviceman.
Warning! The company denies all liability if
and when these norms are not respected.
The first wash cycle
Once the appliance has been installed, and
before you use it for the first time, run a
wash cycle with detergent and no laundry,
using the wash cycle 1.