Filter
Top Products
12 13
PROBLEM CAUSE SOLUTION
ON/OFF switch does not
illuminate when pushed
Steamer not plugged in Plug into electrical outlet
Circuit overload Check household fuse
box and reset the circuit
breaker or replace the
fuse. Do not operate
another high wattage
appliance on the same
circuit
Steamer fails to heat Steamer not plugged in Plug into electrical outlet
Foot press ON/OFF
switch not in “ON”
position
Press the toe touch
ON/OFF switch on the
steamer body
No Steam Steamer not plugged-in Plug into electrical outlet
Steam on Demand button
not in “ON” position
Press the Steam on
Demand button located
on the steamer handle. It
will glow green.
Water tank is low or empty Check water tank to be
sure it is full. See filling the
water tank on page 7.
PROBLEM CAUSE SOLUTION
Steamer beeps Water tank is empty Re-fill the water tank
Steamer has reached
heating temperature
Push the Steam on
Demand button to begin
your steaming session
Water filter not installed Install water filter per
Assembly Instruction #7
on page 6
Steamer nozzle spits
water
Steam intensity too high Reduce steam intensity to
a lower setting
The steam nozzle and
hose are not being used
in a vertical position
Hold the steam nozzle
and hose vertically
Problem Solving