Filter
Top Products
44
Maintenance and Repair (continued)
Maintenance of nanometer titanium filter net
Remove the filter net.
The stains remained on inhaling window and inhaling net
can be removed with a soft cloth.
If there are stains on nanometer titanium filter net,
please remove them with dust collector.
1
Inhaling net
Filter net holder
Nanometer titanium
filter net
2
Hold the nanometer titanium filter net and release it
from holder (with 6 latches)
6
Use a soft cloth to clean the stains on filter net holder.
3
Latch
Latch
Filter net holder
Nanometer titanium filter net
When icing is possibly underway
1
Turn off
Water
supply hose
Turn off the tap, and disassemble
the water supply hose.
(Refer to page 13 for proper dis-
assembly)
13
1
Make the water supply hose
downward, but don't bend it.
• Lest the water remained in the
charging hose will flow out.
2
Select the "TUB CLEAN" process, and the operation
will stop after 30 minutes.
30
•
All the water remained in the charging hose can be drained.
3
Put down the water drainage hose, place its tail in
water container such as basin.
4
Only set the "Spinning" 1 minute, and operation. 42
1 42
5
Switch off the power.
6
When icing happens
Disassemble the water supply
hose, and put it into the warm
water as hot as 40
o
C.
40
1
Pour the warm water as hot as
40
o
C into the basket.
40
2
Connect the water supply
hose to the tap, and check the
washing machine to make
sure the water supply and
drain are in normal case.
3
If the stains are serious, please replace with a new nanometer
titanium filter net.