Filter
Top Products
18
Hope to switch off the buzzer beep after the completion of the washing process
Follow the below steps to switch off the buzzer beep after the completion of washing process.
You can press and hold down the START/PAUSE button for at least three seconds to recover the beeping.
3
1
Press the power button.
2
Press and hold down the START/PAUSE button for at least three seconds, the buzzer beep
can be switched off.
3
Control Panel(continued)
( )
Attention
3
Cut off the power supply.
Lid Lock function
The lid will be locked automatically when washing for children's safe.
With the set of Lid Lock function, the washing machine can't operate if the lid is opened. (The control panel
will release the alarm if the lid is opened)
When you want to open the lid
When beginning again
With the set of safe mode, the lid will be locked as the washing machine restarts.
Without the set of safe mode, the lid will be locked automatically during the course spinning.
Press "START/PAUSE" button Lock will be removed automatically after washing. Lid can be
opened.
/
Remove safe mode
1
Press POWER ON/OFF button .
/
2
Press and hold down the WASH button for at least three seconds, then the safe mode can
be removed.
3
3
Press and hold down the "WASH" button for at least three seconds again to set the safe mode.
(
)
Factory initial state for "safe mode".
Attention