Filter
Top Products
SKU 92336-SKU92337 For technical questions, please call 1-800-444-3353. Page 4
Removal of Coins:
1. Remove the Plug (1), Cap (2), Nut (3), Retaining Ring (4), Glass Globe
(5), Gasket (6), Brush Plate (7), and Adjustable Wheel (8). Hold Body (9)
firmly and lift up. You should be able to reach the coins. After removing the
coins, carefully reassemble the above parts in the reverse order.
See illustration on Page 6 and Figure 2.
Body (9)
Glass Globe (5)
Nut (3)
Adjustable
Wheel (8)
Brush Plate (7)
Cap (2)
Gasket (6)
Retaining Ring (4)
Figure 2
Varying the Amount of Gumballs to be Dispensed:
1. Loosen screws on the Adjustment Wheel (8). Adjust the size of the
opening to the desired amount of Gumballs to be dispensed. Tighten screws
and replace assembly.
See Figure 3.
Figure 3
Operating the Machine:
1. Place the coin into the slot
(See Figure 4)
on the Face Plate of the Coin
Mechanism (10). Turn the Handle one revolution. To dispense without using
coins, with the Globe off, lift the Coin Mechanism (10) upward from it’s
position. Turn over. Unscrew and remove the brass colored restraining arm
on the back of the Coin Mechanism (10). Reassemble.
See Figures 4 & 5.
Figure 4
Face Plate of the
Coin Mechanism (10)
Coin Slot
Handle
Face Plate of the
Coin Mechanism (10)
Figure 5
Restraining Arm