Harbor Freight Tools 92337 Washer/Dryer User Manual


 
SKU 92336-SKU92337 For technical questions, please call 1-800-444-3353. Page 3
6. Maintain products with care. Keep Gumballs filled in globe. Empty coins
out of lower portion when refilling to prevent over filling.
7. Children should be supervised. Letting a child operate the Gumball
Machine is fun for all but caution should be observed. Allowing the child to
dispense and chew more than one Gumball at one time could cause
choking. Coins could be swallowed. Both the 9” and the 15” Gumball
Machine on the Stand could be pulled over by the child, causing personal
injury. It is best to supervise the operation of the Gumball Machine. Make
sure children keep their hands clear of the dispensing area to avoid getting
hands or fingers caught. Harbor Freight Tools is not responsible for injuries
caused by this product.
8. Caution when refilling Gumballs. Avoid sharp edges on the inside of the
cast metal base when disassembling and assembling this product. Caution:
The Globe is made of glass. Set Carefully on the table or workbench and
avoid accidently hitting the glass or letting it roll off the counter.
Unpacking
When unpacking the Gumball Machine, check to make sure that all parts
are included as shown in the parts list. If any parts are missing or broken,
please call Harbor Freight Tools at the number below. Thoughly clean all
parts with anti-bacterial soap and water before using. Be sure to thoroughly
dry all parts before reassembling.
Operating Instructions
Filling Machine:
1. Works with all coins, pennies, nickels, dimes and quarters. Dispenses
Gumballs, Peanuts, Jelly Beans, and more. To add Gumballs or other small
objects to the Gumball Machine, you must first unscrew the Plug (1) at the
top and remove the Cap (2). Pour Gumballs (not included) slowly into the
Glass Globe (5). Reassemble the Cap (2) and Plug (1).
See Figure 1.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It
must be understood by the operator that common sense and caution are
factors which cannot be built into this product, but must be supplied by the
operator.
Glass Globe (5)
with Gumballs
Plug (1)
Cap (2)
Figure 1