Filter
Top Products
9
8
To Remove Lint
1. Lint and hair may be removed from fabrics with the lint pad
by brushing the pad across fabric slowly from left to right.
2. To clean lint pad, brush on scrap fabric or towel from right
to left.
To Iron
Nylon
Silk
Acrylic
Polyester
Wool
Rayon
Cotton
Linen
Ironing Instructions
Dry iron on the wrong side of the fabric.
Dry iron on the wrong side of the fabric.
Dry iron on the wrong side of the fabric.
Iron with fabric still damp.
Steam iron on the wrong side of fabric.
Iron on the wrong side of fabric.
Iron while still damp using steam and/or spray.
Iron on wrong side of fabric while still damp.
Fabric Setting Chart
Temp
Control
•
•
••
••
•••
•••
•••
•••
1. The Water Tank of your travel iron/steamer should be emp-
tied after each use. Turn Temperature Control Dial to OFF
(O). Unplug the travel iron/steamer and hold over a sink.
Turn travel iron/steamer nose down until Water Tank
Opening is parallel with sink. Water will run out of Water
Tank Opening.
2. To store the travel iron/steamer after it has completely
cooled, press Handle Release Button and rotate the han-
dle until it locks (180 degrees) so that the handle is parallel
over the travel iron/steamer.
3. Put Brush Attachment over the soleplate and engage the
lock.
4. Place the travel iron/steamer in the storage bag and store
resting on its side. Do not store travel iron/steamer lay-
ing flat on soleplate.
Soleplate
1. Never iron over zippers, pins, metal rivets, or snaps, as
these may scratch the soleplate.
2. To clean occasional build-up on the soleplate, wipe with
a sudsy cloth. Do not use abrasive cleansers or metal
scouring pads.
3. Always store travel iron/steamer resting on its side.
Caring for Your Travel iron/steamer
Steam
Setting
840124300 ENv02.qxd 3/16/04 9:28 AM Page 8