Filter
Top Products
9
8
Caring for Your Iron and Soleplate
1. The Water Tank of your iron should
be emptied after each use. Turn
Temperature Control Dial to OFF.
Unplug the iron and hold over a
sink. Turn iron upside down until
Water Tank Opening is parallel with
sink. Water will run out of water
tank opening.
2. After iron has completely cooled,
fully retract cord into iron and store in an upright position.
Do not store iron laying flat on soleplate.
Soleplate
1. Never iron over zippers, pins, metal rivets, or snaps, as
these may scratch the soleplate.
2. To clean occasional build-up on the soleplate, wipe with
a sudsy cloth. Do not use abrasive cleansers or metal
scouring pads.
3. Always store iron upright in the heel rest position.
Fabric Setting Chart
Temp. Control
Setting
Off
Nylon
Acrylic
Silk
Polyester
Wool
Rayon
Cotton
Linen
Ironing Instructions
Steam
Setting
Dry iron on the wrong side of the fabric.
Dry iron on the wrong side of the fabric.
Dry iron on the wrong side of the fabric.
Iron with fabric still damp.
Steam iron on the wrong side of fabric.
Iron on the wrong side of fabric.
Iron while still damp using steam
and/or spray.
Iron on wrong side of fabric while still
damp.
O
840121300 ENv03.qxd 2/10/04 11:18 AM Page 8