Filter
Top Products
4
1. Unplug iron. Turn Adjustable Steam
Knob to (Dry
Iron). Place iron
soleplate on flat
surface. Open
water fill cover.
2. Using a cup, slowly pour 6 ounces
of tap water into water tank opening.
Do not fill iron directly from the
faucet.
3. Plug iron into outlet. Set iron upright
on heel rest.
To Steam Iron
4. Turn the Temperature Control Dial to
desired fabric setting in the steam
range.
5. Allow two minutes for the iron to
reach desired temperature.
6. Set Adjustable Steam Knob to the
recommended
steam level. See
the “Fabric
Setting Chart.”
7. To turn iron off, set Adjustable
Steam Knob to (Dry Iron). Turn
the Temperature Control Dial to Off.
Unplug iron.
8. Empty water from the iron following
directions in “Caring for Your Iron.”
Water
Please use ordinary tap water. If you
have extremely hard water, alternate
between tap water and distilled water
for use in the iron.
To Dry Iron
3. Turn Temperature Control Dial to
desired temp-
erature. Allow
two minutes for
iron to reach
desired
temperature.
4. To turn iron Off, turn Temperature
Control Dial to Off and unplug iron.
1. Plug iron into outlet.
2. Set the Adjustable Steam Knob
to ( Dry Iron).
Using Your Iron
840091300 ENv01 9/24/01 4:32 PM Page 4