Filter
Top Products
5
Fabric Setting Chart
To Iron
Off/O
Nylon
Silk
Wool
Polyester
Rayon
Cotton
Linen
Ironing Instructions
Steam Setting
Dry iron on the wrong side of the fabric.
Dry iron on the wrong side of the fabric.
Steam iron on the wrong side of fabric.
Iron with fabric still damp.
Iron on the wrong side of fabric.
Iron while still damp using steam and/or spray.
Iron on wrong side of fabric while still damp.
Troubleshooting
PROBLEM
Iron won’t heat.
Water is leaking
out of the iron.
Iron won’t steam.
Iron leaves spots
on clothing.
Wrinkles not
removed.
Iron too hot.
THINGS TO CHECK
• Is the iron plugged in and the outlet working? Check
the outlet by plugging in a lamp.
• Is the Temperature Control Dial turned to a
fabric setting?
• If auto shutoff model, is the Reset Button light
illuminated? If not, push to reset.
• Do not overfill the water tank.
• If steam ironing, is Adjustable Steam Dial in a steam
position, the Temperature Control Dial in the steam
range, and did the iron have enough time to preheat?
• If dry ironing, make sure the Adjustable Steam Dial is
in the DRY IRON position.
• Check the water level.
• Is the Adjustable Steam Dial in the STEAM position?
• Has the iron had enough time to preheat?
• ALWAYS empty the water tank of the iron after using.
Water left in the tank may discolor clothing and
soleplate.
• Check Temperature Control Dial is set to correct fabric.
• Check Temperature Control Dial and set to lower
setting. Let iron cool down 5 minutes before continuing.