Hamilton Beach 840066300 Iron User Manual


 
4
Spray/Steam Selector – Turn knob to
select Spray or
Steam. On Spray,
push to release a
fine spray of water
for difficult wrinkles
in cotton or linen.
On Steam, push
for an extra blast
of steam.
Automatic Shutoff Reset Button –
After the iron has
been on for 1 hour,
the orange light
will go out and the
iron will automati-
cally turn off. To
continue ironing,
push the Reset
Button again and
the iron will reset
for 1 hour.
Wrap & Snap Cord – When finished
ironing, let the iron cool then wrap cord
and secure with the Wrap & Snap on
the plug.
Power Light – This red light indicates
the iron is
plugged in.
Adjustable Steam Switch – Set the
switch at 0 to dry
iron. Move switch
to steam or
when using blast.
Power
Light
Reset
Button
Features (on selected models)
To Steam Iron
1. Unplug iron. Using a cup, slowly
pour 5 ounces
of tap water
into water
tank opening
as illustrated.
2. Plug in iron.
3. Set the Adjustable Steam Switch to
desired amount
of steam. Turn
the Temperature
Control Dial to
desired setting
in the steam
range.
Opening
4. Allow 3 minutes for the iron to reach
desired temperature.
5. To turn iron off, turn Adjustable
Steam Switch to 0 (Dry Iron). Turn
the Temperature Control Dial to O
(OFF). Unplug iron.
6. Empty water from the iron following
directions in “Caring for Your Iron.”
Water
Please use ordinary tap water. If you
have extremely hard water, alternate
between tap water and distilled water
for use in the iron.