Filter
Top Products
7
5. Allow 2 minutes for the iron to reach desired temperature.
6. Set Steam ON/OFF Control to .
7. To turn iron off, set Set Steam ON/OFF
Control to O (Dry Iron). Turn the
Temperature Control Dial to Off.
Unplug iron.
8. Empty water from the iron following
directions in “Caring for Your Iron.”
Water: Please use ordinary tap water. If you have extremely
hard water, alternate between tap water and distilled water
for use in the iron.
To Vertical Steam
1. Follow Steps 1 through 5 in
“To Steam Iron.”
2. Hang garment in a location that is
not susceptible to damage from heat
or moisture. Do not hang in front of
wallpaper, window, or mirror.
3. Hold iron about 6 inches (15 cm) away
from garment and press and release
the Blast Button to steam out wrinkles. Do not press
Blast Button more than once every 5 seconds.
4. To turn iron off, turn Temperature Control Dial to OFF.
Unplug iron.
5. Empty water from the iron following directions in “Caring
for Your Iron.”
NOTICE: Do not allow hot soleplate to touch delicate
garments.
1. Plug the iron into outlet.
2. Set Steam ON/OFF Control to
O (Dry Iron).
3. Turn Temperature Control Dial to
desired temperature. Allow 2 minutes
for iron to reach desired temperature.
4. To turn iron Off, turn Temperature
Control Dial to OFF and unplug iron.
To Dry Iron
To Steam Iron
6
1. Unplug iron. Set Steam ON/OFF Control to O (Dry Iron)
Hold iron with soleplate parallel to the ground. Open water
fill cover.
2. Using a cup, slowly pour tap water into water tank opening
until MAX fill line is reached. Close water fill cover. Do not
fill iron directly from the faucet.
3. Plug iron into outlet.
4. Turn Temperature Control Dial to desired fabric setting in
the steam range.
840164300 Ev03.qxd 4/11/07 12:21 PM Page 6