Filter
Top Products
5
Parts and Features
Spray
Steam
4
Steam ON/OFF
Control
This iron is equipped with a position/motion sensor. This means
that if the iron is left motionless it will turn off automatically and
cool to room temperature.
To restart iron, simply move the iron and allow it to reheat on
heel position.
The iron will reheat to the previously selected setting.
Iron Position Motionless Time
Resting on soleplate 30 seconds
Resting on either side 30 seconds
Resting on heel 15 minutes
Sensor Control
Position Sensing
The iron will turn off automatically when left in the following
positions.
The auto off time varies based on the iron’s position.
Auto Shutoff Reset Light
After 30 seconds of no movement in the horizontal position,
the iron will automatically shut off and the green light will
blink. Move iron upright to vertical position to turn back on..
Water Fill
Cover
Steam
ON/OFF Control
Spray and Blast
Buttons
Self Clean
Swivel
Power
Cord
Heel
Rest
Temperature
Control Dial
Auto Shutoff
Reset Light*
(GREEN)
and Power
ON Light
(RED)
Soleplate
840164300 Ev03.qxd 4/11/07 12:21 PM Page 4