Filter
Top Products
1.After washing, close the water faucet. (If needed, you can dismantle the water
inlet hose).
2.Do not store water in the washing machine for a long period. Drain the water
completely after each using.
3.Be sure to pull off the power plug before maintenance.
4.Hang up the power cord and drain hose.
Wipe off the water drops on the surface of the machine and inside the tub. Open
the top lid for some time (about 1 hour), then close the top lid.
After using, please clean the lint and foreign materials of the lint filter etc. in time.
Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
Using process
Using process
7 Disposal after washing
1 Demount the lint filter
Put your hand on the proper position
and demount it by pushing it down(see
to figure 1)
3 Fix the lint filter
After cleanning,put the downside of the
lint filter into the filter cover,then fix it
by pushing the upside in (see to figure 3)
2 Clean the lint
When the lint is wet,put the lint filter
under the water and clean it (see to
figure 2)
When washing,lint filter must be used
After using,please clean it in time
Clean the lint filter
Figure 1
Figure 3
Figure 2
The filter screen of the water inlet
valve is likely to be blocked by
foreign materials and influence the
water inlet. Please clean it with
brush every two months.
If the cabinet is dirty, wipe it with wet cloth
Do not flush it directly with water.
Wipe it with neutral detergent.
Do not wipe it with thinner, petrol, alcohol
etc.