Haier XQBM30-22 Washer User Manual


 
Total time: including the normal water inlet time, drain time, excluding the power off time. The total washing
time may be influenced by the water inlet pressure and water level.
Spin time: the time from intermittent running to finishing
When selecting "twice wash" program, first soak for about 20 minutes, pre-wash for about 8 minutes, then
soak for about 5 minutes, then do washing, rinsing and spinning. The wash time in the list includes the pre-
wash time.
When selecting "quick" program,wash,rinse and spin are set automatically,no procedure select can be done
further
5 Close the top lid
Three water levels available according to the laundries quantity: High; Medium;
Low.
After the water inlet under set water level, if higher water level is needed, please
first turn the knob to "Add water", then turn back to needed water level. The
washing machine will fill water to the new water level.
After the water inlet as per the preset water level, in case additional water
quantity is required, please first set the button to the "Add water", push and hold
it to perform automatic water inlet. When it reaches the suitable water level, you
can turn it to the needed water level.
Page 9
When the washing is finished, the three
indicators of "wash" "rinse" "spin" are
all on. The power will be switched off
automatically about 10 minutes after
the finishing of the washing
If you open the top lid, the machine
will stop working except for water
filling and spinning
It beeps to
indicate the
finishing of
washing
START
PAUSE
Using process
Using process
3 Adjust the "water level selection" knob to select
suitable water level
4 Press the "Start/Pause" button
6 Washing finished