Front Load Washing Machine Model:slim3
21
Adjust adjustable feet
Y
N
N
N
N
Remove belt and turn belt pulley by
hand, and then check if there is different
Are the screws of counterweight and
motor loose?
Is belt loose or worn?
Y
Is washer in balance?
Replace it
Y
Y
Y
Fasten them
Dismantle triangle and check
the bearing .If it is
broken, replace it.
Replace motor
Turn on power and set spin program,
then start,check if there is different noise
from motor
Failure:water leaking
Troubleshooting:
N
N
Check if water is leaking from the inlet pipe
or the tap
Is drain pipe broken?
Readjust it.
N
Is cushion of sight window broken?
Replace drain pipe
Reassemble or repair
Is water leaking from outer cylinder?
Remove clothes
Replace outer cylinder
Y
Replace cushion of sight
window
Y
Y
N
N
Check if all tubes and tie-in is leaking
water, including the connecting of tube
and valve, dispenser, tube and
dispenser ,outer cylinder-cushion of sight
window-hose and outer cylinder, drain
pump and gas valve
Check if there is foreign material nipped
between cushion of sight window and
sight window
Y
Y
Y