Filter
Top Products
Front Load Washing Machine Model:slim3
20
Choose pre-wash program and start，
Check if there is 220-240V at import pin
of electromagnetic valve
（See fig 2）
Failure:no draining
Troubleshooting:
（ See fig 1）
Failure :abnormal noise and vibration
Troubleshooting:
Choose pre-wash program and start，
then check if there is 220-240V at export
pin of electromagnetic valve
Is there open circuit between
electroma
g
netic valve and PCB?
Y
Replace electromagnetic valve
N
Reconnect the wire
Y
N
N
Replace PCB
Y
Adjust the height of drain pipe to
80-100 cm
Is the height of drain pipe too high?
N
Turn filter anticlockwise，open and check if
filter is jammed
Clean and tighten filter clockwise.
Turn on and choose spin program to
start. Measure if export voltage of PCB to
drain
p
um
p
is 220-240V
Y
Dismantle the screws
Clean
N
Y
Y
Arrange hose and clean
Check if hose connecting cylinder to pump is
bent or jammed
N
Turn on power and choose spin program to start.
Measure if import voltage of drain
pump is
220-240V
Cut off and check if the connection between
drain pump and PCB is open
Replace drain pump
Y
N
Y
Replace the wire.
N
Replace
PCB
N
N
Is the pack screws dismantled?
Y
Is there foreign material in the washer?
Y