Filter
Top Products
Various button initial status for "Normal program"
2. Press "Cycles" button to select a suitable full automatic cycle
The Normal program will be automatically selected after powering on. If other
full automatic program is desired, press "Auto-program Selection" button
until corresponding indicator turns on.
Cycle Signal
Wrinkle Care
Cycles
Nixie display
Temp
Sensor Dryness Level
Timed/Cycles
Softer
Off
Normal
Indicate current program remaining time
High
More Dry
Auto-program
Cycles
Customized
Normal
Heavy
Cotton Delicate
Bulky Items
Initial status of various buttons when setting "Auto-program Selection".
Cycles
Wrinkle Care
Cycle Signal
Delay Start
Timed/ Cycles
Temp
Dryness Level
Notes: If "Customized" is selected, various buttons will indicate previous conditions
set by the user.
Normal Heavy Cotton Delicate Permanent Press Bulky Items
To be used together with reserve function, off if reserve is disabled
Softer
Indicate current selected program remaining time
Auto Dry
More Dry
"Customized" function is a program designed to facilitate user's operation. It can
memorize programs defined by user himself and display the previous program
upon next application of this function.
Use details are as follows:
After powering on, press "Cycles" until "Customized" status, then set "Cycles" to
Timed Dry or Rack Dry, and set status of other buttons. Press "Start/Pause" button
or after half a minute, the program defined by user himself will be stored and
will be directly displayed upon next use.
Notes: Pressing "Sensor Dryness Level" button will be inactive during use of
"Customized" function.
17
High High
LowMidium
Permanent Press
Air Only(No Heat)
High
English