Haier HWM 80-35 Washer User Manual


 
Preparation before washing
Using Process
Connect the water inlet
hose.
Confirm that the washing
machine is earthed reliably.
Than insert the power plug
into the receptacle. Do not
connect the earth terminal to
the gas pipe and tap water
pipe.
Put down the drain hose.
Slanting or uneven ground
may result in unsatiable
working or abnormal noise.
Please make the machine
stand horizontally.
1.
2.
3.
4.
Preparation before washing
-1
-2
-3
-4
6
Usage of the drain hose
4.
If extra drain hose is needed, please
make separate purchase. The inner
diameter of the extra hose shall not less
than 30mm, and the length shall not
exceed 1.5m.
-4
If extra drain hose is too long, cut it either
at point A or B.
5.
-5
The drainage shall be smooth with
the drain hose.
1.
The height of the drain hose shall be less
than 10cm, or the drainage will not be
smooth enough and cause incomplete
drainage.
2.
Do not tramp on or press the drain house.
-1
-2
3.
If the drain hose is too long, cut it at mid
point. To make smooth drainage, cut the
front end of the hose slantingly.
-3
Before Using
Installation and adjustment
5
12
The capacity of washing and spinning of the machine
refer to the largest weight of the standard laundries
under dry condition that can be washed or spinned in
one time. Laundries quantity in one washing cycle
shall be lower than the rated capacity. The largest
capacity of this machine is given page #.
The thickness, size, type of the cloth will influence the
actual washing capacity. It is suitable to put in
reasonable amount of laundries and the laundries can
be turned round in washing for on time washing.
Do not select "Maximum" water level for laundries less
than 2-3kg, so as to avoid splashing of water.