Filter
Top Products
4
3
Handicapped or children without care shall
not use the machine.
Do not stretch hands into the working
machine. It is dangerous even if the
rotation is slow. Take special care of the
children.
Do not decompose, repair or alter the
machine by your self.
Do not put any hot or heavy items (such
as the kettle with hot water) on the
washing machine.
Do not wash laundries with volatile
material (such as thinner, petrol etc.)
P
t
e
ro
l
T
h
n
e
rin
Keep the machine away from direct
sunlight and heat source like the heater.
To prevent your laundries and washing
machine from damage, be sure to take
out all of the foreign materials from your
pocket, such as coins, button, sand or
hair pins etc.
Please install and adjust the machine
according to the requirement of the
manual. It is very important to your
security and correct operating the
machine.
After opening the package, please
take out the lint filter from the
document bag, install it to the
overflow filter of the wash tub. See
to the figure.
Install the lint filter
Before Using
Safety Precautions
Before Using
Installation and adjustment
Install the water inlet hose;
Select the water level
Insert the water inlet hose into the
water-inlet on the control panel
directly. (Pull it out to dismantle it).
Fill the water to the water level
selected according to the quantity
of the laundries.
Attention:
Do not exceed the "Maximum"
water level, otherwise the
water may overflow out of the
machine.
Use the quick water Inlet:
Insert the water filling jointer
into water inlet hose, then push
the water filling jointer into the
water inlet on the control panel.
(To dismantle water inlet hose,
just push the control panel
handle as indicated in the
figure and pull it out.
Fill water into the wash tub
directly through quick water
inlet. It can reduce the humidity
inside the control panel
significantly and prolong the
operating life of the
components.
Water-filling jointer
Water inlet hose
Push
Control handle
Quick water inlet
Maximum
Medium
Minimum
Water inlet hose
Water inlet
Water level
indicator