Haier HWM85-7288 Washer User Manual


 
Speci cation
Rated voltage/Frequency 220-240V ~ /50Hz
Water level / Water quantity (about) 1/20L, 2/29L, 3/38L, 4/46L, 5/54L, 6/60L, 7/66L,8/72L
Injection pressure 0.03 MPa ~ 1.0 MPa
Washing/Spinning capacity 8.5kg/8.5kg
noitanalpxEanemonehP
The spinning is intermittent when it starts. Balance the laundries to avoid slanting.
Push the “spin” button to select “Spin”, but it doesn’t
work.
The program is setting the drain time. Some time is
needed before it starts spinning.
The nal spinning is nished, it becomes rinsing and
begins to inlet water.
Because the washing clothes lean to one side,the
safety switch acts.After water lling and running,
eliminating the eccentricity of washing clothes,then
beginning to spin.
When the power pl
ug is inserted,computer board
indicator is switched on, and the machine starts
working.
It is the special resume function. In the case of power
failure or the power plug is loose during washing, the
machine can save the running program, and resume
the program afterthe power supply is recobered. You
do not need to set the program again
15