Filter
Top Products
12
Push “
” button to switch on the power
Push “
” button, select suitable water level
Push “
” button to select suitable reserve wash program
Push “
” button to select suitable automatic program
Afterthepowerisswitchedon,“SOAK”isautomaticallyset.Toselectotherfully-autoz
program, please push the “PROGRAM” button till the corresponding indicator is on.
Refer to the “Program” button on Page 11.
Whenthe“soak”isselected,afterthewaterstarttojet,theprogramwash,rinseandz
spinwillbeimplemented(lowwaterlevelsoakfor25minutes,midlevel35minshigh
level 45 mins).
PushPROGRAMbuttonfor 8 times,anditwillresumetheinitialmode.Itwillcirculatez
in that sequence.
Water pressure and water level inÀuence the washing time.z
Eventhere’snowaterinthetub,thespinningwillstartafter a certainperiod.z
Washandspinafterputtingthedamageableclothesintotucknet,toavoidscathe.z
Wash the laundries that are prone to lose colors separately from other laundries.z
Whenwashingstartoropeningcoverintermitting,thewashingmachinewillbegintoz
work after a period time, this is normal phenomenon.
Only select RINSE program,If there’s water inside the tub, the machine will spin beforez
rinsing,Ifthere’snowaterthemachinewillrinsedirectly.
After switching on the power, the washing machine will execute fuzzy program z
automatically to detect the cloth during the standard program. After defection, it can set
the water level automatically. To select other water level, ¿rst push the “START/PAUSE”
button, then push the “ WATER LEVEL ” button to set the water level.
The pulsator will not rotate unless the water is ¿lled to selected water level.z
After switching on the power, the reserve program is set to off mode automatically. If you
need to set the washing procedure to be ¿nished at reserved time, please push the
“ RESERVE ” button to set the reserve wash program. Refer to reserve button in Page 11
for selection.
Con¿rm the operation of reserve program
When the “z RESERVE” function is activated, the indicator light of
the program you have set will be off. The “RESERVE (HOURS)” and
“REMAIN MINUTES” indicator lights will be on. During reserve procedure,
push the “RESERVE” button to display the reserve time mode.
To change the running program or cancel the reserve setting, you z
need to switch off the power and make new selection.
1
3
4
2
Push “ ” button, close the top lid
Finish washing
If the top lid is opened when the machine is spinning, the machine will stop running z
and alarm.
After Finishing washing, it will switch off power automatically.z
5
6