Filter
Top Products
11
Use the operation buttons
Off
On: indicate the programabout to run,or indicate
theselectedmodeorindicatethewaterlevel
Flashing:indicate the running program
It displays “--” during detecting.z
Itdisplaystotalremainedtimeduringthez
running program (min).
It displays remained reserved time duringz
reserveprogram hour
It displays abnormal symbol in abnormalz
situation.(Seeto Page14)
Program Applicable situation
SOAK Washing the relatively big thick or very
dirty laundries
STANDARD Common washing
If“STANDARD”programis set, the
machinewillexecutefuzzydetection.The
computer will set the water level and
washing time as per the cloth and quantity
of the laundries.The whole procedure is
under automatic control.
SOFT Washingthewoollentextiles
QUICK Posthaste washof the laundry under 2.0
kg with light soil.
Thewaterlevelwillautomaticallyset24L.
WASH Justrunthewashingcyclewithout
drainage cycle. The detergent was left
insidethedrumandcanberecycled.
RINSE Remove theleft detergent from theclothes
andthenrinsetheclothes
SPIN Whentheclothesarewashedorthe
clothes are quite wet, extra spin isneeded.
TUB DRY Drying the innertub and the outertub,
which can avoid growing mildew.
Afterthepowerisswitchedon,pressittostart
the machine.
During working, push itto pause.z
Duringpause,pushthisbuttontorestartz
andgoonworking
PushtheOn/Offbuttontoswitchonthez
power.
Whenthepowerison,pushitagaintoz
switch off the power.
thepower.Ifthestart/pausebuttonis
not pushed, thewashing machine will
z
automaticallyswitch off thepower
after 5 minutes.
Thedigitrondisplaysthetimeremainedz
(inminute)beforethewashingis¿nished.
Push down thereserve button. The reservez
indicator light is onthe digitron displaysthe
reservetimeof¿nishing washing (in hour).
When the machine is started, the reservez
indicator light is on,indicating that the
reservefunctionisrunning.
The washingmachine can detect thez
laundries automatically during the
STANDARD program Afterdetection,
it will setthe water levelto suitable value
among 30L,40L and 50L automatically.
You can alsoset water level by yourself.z
Afterthemachineisstarted,itwillnotset
water level automatically. You shall push
the start/pausebutton to make new setting.
If there’s water inside thetub, the machinez
cannotdetectthelaundriesandwilldisplay
waterlevel40L.Ifwetlaundriesareputin,
it may display water level50L. You must
setsuitablewaterlevelbyyourself.
If quick programis selected, it willdisplayz
water level 24L.
Iftubdryprogramisselected,thewaterz
levelwillnotrespond.
Duringoperationofwashandrinsez
program,youcanpushdownthewater
levelbuttontoaddwater.Whenyou
releasethebutton,oritreachesthe
overÀowwaterlevel,themachinewillstop
adding water.
The water leveldecided may be differentz
from actual value because of the different
moisture levelof the laundries.
The rinsing water level is one water level
higher than the washing water level( except
the maximal and man-rated water level).
z
PushtheOn/Offbuttontoswitchon