Filter
Top Products
13
Even there's no water in the tub, the
spinning will start after a certain period.
Do not use soak process for woolen laundries.
Wash the laundries that are prone to lose
colors separately from other laundries.
The pulsator will not rotate unless the
water is filled to selected water level.
Selection method of the procedure programs
Attention
If you push the "PROCEDURE SELECTION" button for 6 times, it will resume the
original mode, and it will circulate like that.
The soak program can be used as fitting of the STANDARD & JEANS automatic
programs.Soak with slight stirring before wash.
Times of pushing
the"PROCEDURE
SELECTIONbutto n"
1
2
3
4
5
Applicable procedure
Contents( indicates
the programs about to run)
the nixie tube
When the laundries need rinsing
and spinning after manual washing
If the laundries are very dirty,
or the sleeve and collar are
dirty,first soak then wash
Repeat using the washing liquid
Selected procedure
selection
Wash(the washing liquid
remains in the tub)
Wash,rinse(the rinsing liquid
remains in the tub)
Rinse,spin
Spin(spin after drain)
Soak,wash,rinse,spin
Wash, rinse, spin
When the common laundries need
washing,rinsing and spinning.
Repeat using the washing liquid
0
When the laundries need only
spinning after manual washing
(first drain the spin)
Soak Wash Rinse Spin
Soak
Wash Rinse Spin
Soak
Wash Rinse Spin
Soak
Wash Rinse Spin
Soak
Wash Rinse Spin
Soak
Wash Rinse Spin
4.Push the WATER LEVEL button to select
suitable water level
When the power is switched on, the washing machine will check the cloth automatically.
After that, the water level is set automatically. To select other water level, push the
button. Refer to the Standard usage quantity of the detergent and water quantity in
Page 9 and WATER LEVEL SELECTION in Page 10 for the selection.
Page 9
Page 10
WATER LEVEL SELECTION