Filter
Top Products
4
5
If the water pressure is too lower,the machine wil adjust program automatically for the effect of washing and rinsing.
Even there's no water in the tub, a certain period is required before spin starting.
Wash and spin after putting the damageable clothes into tuck net,to avoid scathe.
The pulsator will not rotate unless the water is filled to selected water level.
(Except postable program)
After the machine starts or the top cover is opened the machine starts working after a white,it is natural phenomenon
WATER LEVEL
6 Finish washing
After Finishing wash alarm automatically
Attention
The soak procedure can work in cooperation with automatic programs like common,cotton,standard, jeans. There
is intermittent pulsator stirring during soak.
After the machine starts operation, you can only set the program and procedure during washing, and can not
make setting in other cases.
Press " WATER LEVEL "button,
select suitable water level
After switching on the power, the washing machine will execute fuzzy program automatically to detect
the cloth. After defection, it can set the water level automatically. To select other water level, first push
the "start/pause" button, then push the "water level" button to set the water level. Refer to "water
level button"in Page 11 for selection.
Page 11
Push the "reserve" button to select suitable
reserve wash program
After switching on the power, the reserve program is set to off mode automatically. If you need to
set the washing procedure to be finished at reserved time, please push the " reserve " button to
set the reserve wash program. Refer to reserve button in Page 11 for selection
.
When the "reserve" function is activated, the indicator light of the program you have set
will be off. The "reserve (hour)" and "time remain" indicator lights will be on. During
reserve procedure, push the "reserve" button to display the reserve mode.
To change the running program or cancel the reserve setting, you
need to switch off the power and make new selection.
the washing will be finished after 18 hours.
Page
RESERVE
START
PAUSE
6
Push the "start/Pause" button