Filter
Top Products
1
3
5
7
9
4
2
6
8
10
Specially enactment this function to protect the children.
Quick Quick and high-efficiency wash for common laundries
Washing the relatively big and thick laundries
Woollen
Cotton
Standard
Washing the normal laundries
Tub dry
Washing the cotton textiles
Posthaste
Super quick wash of the laundry under 1 kg with light soil
Washing the woollen textiles
Child lock function
Push and hold the water level button and spin button, then push down the power on/off
button. The digitron displays . You can continue setting desired washing procedures.
After setting, push down the start/pause button. The child lock function is activated. All of
the buttons are locked and cannot make selection.
Release the child lock function: push down the water level and spin button at the same
time for more than 3 second. After a beep sound, the child lock function is released.
Æô¶¯
ÔÝÍ£
START
PAUSE
During working, push it to pause working.
During pause, push it to resume working.
Start/Pause button
After the power is switched on, push it to Start the machine
During sensing, it displays --
During reserve procedure, it displays the remained reserve time (in hours)
During operation of programs, it displays the remained time (minutes).
If the remained time exceeds99 minutes, it adopts A at tens place to represent 100
minutes, b to represent 110 minutes. For instance, A3 represents103 minutes.
In case of abnormal phenomenon, it displays the abnormal symbol (see to Page 15)
Reserve/remain time indicator digitron
SURP
LUS MINUTES
RESERVE
HOURS
FLASH
LIGHT
RESERVE
E
WATER LEV L
PROGRAM
POSTHASTE
COTTON
COMMON
STANDARD
QUICK
TUB D
RY
WOOLLEN
JEANS
FUZZY
During common and standard programs,the washing machine
can detect the laundries automatically. After detection,it will
set the water level to suitable value among 4, 6, 8,and 10 auto-
matically.If wet laundries are put in, it may display water level
10 . You must set suitable water level by yourself.
The water level decided may be different from actual value
because of the different moisture level of the laundries.
You can also set water level by yourself. After the machine is
started, it will not set water level automatically. You shall push t
he start/pause button to make new setting.
If there's water inside the tub, the machine cannot detect the
laundries and will display water level 6 .
During operation of wash and rinse program, you can push
down the water level button to add water. When you release
the button, or it reaches the overflow water level, the machine
will stop adding water.
If woollen program is selected,it will display water level from 2
to 6.
If posthaste program is selected, it will display water level 3 .
When water level 2 is reached in water filling, it will perform
washing while filling water.When water level 3 is reached, it
will change to normal washing.
Water level button
Res
erve b
utton
In normal operation mode,
the reserve indicator light
is off. The time remain
indicator light is on. The
digitron displays the time
remained (in minute) before
the washing is finished.
Push down the reserve
button. The reserve indi-
cator light is on the digitron
displays the reserve time
of finishing washing (in
hour).When the mach-
ine is started, the reserve
indicator light is on, indicat-
ingthat the reserve function
is running.
Program
selection button
Following automatic programs are available for selection
Program
Applicable situation
Common Common washing
Drying the inner tub and the outer tub,which
can avoid growing mildew.(afterwashing clothes,
there is dampness between the inner tub and
the outer tub,the wall of the inner tub and out
tub can breed mildew,here you can choose the
tub dry program,Drying the inner tub and the outer
tub,keeping the inner tub and outer tub dry, which
can avoid growing mildew.