Haier HWM50TLF Washer User Manual


 
Quick Cycle
Quick washing of the light dirt laundries only 25 minutes
Gentle Cycle
Washing the woollen textile or underwear
PROCESS Button:(5)
This is to selectwashing process.
Soak will not work in Quick cycles.
W ater levelindicatorwill shut off if only Spin is selected.
WATER LEVEL Button:(6)
W ater levelsmaybe setat thebeginningof the wash or at pause.
During Soak, W ash or Rinse press this buttonto manually
replenish water.
Release
to stop.
Functionautomaticallyis inactivewhen water reachestheoverflow
Protec
tion level.
TEMP SELECT Button:(7)
Initial settingis Warm/Cold when washer is poweredon.
Press buttonto change
selectionbasedon clothesput
in the washer.
To selectinlet water temperaturefor wash and rinse.
Operating Procedure
1. Press power on button.
The washer will now bein the working statusin the Normal cycle.
If theStart/Pause buttonis not pressedwithin 5 minutesafter powering on theunit
it will automaticallyswitch off andreturn to the standby mode.
The washer will also return to the standby modeimmediatelyafter completionof
thewash process.
Regardlessof thesettingsby pressing thepower on/of f buttonall programswill
stop andreturn to thestandby mode.
2. Selectionof Cycles
When thewasher is poweredon the Normal cycleis thedefaultcycle.If other
cycleis requiredpress thecyclebuttonfor desiredprogram.
3. ProcessSelect
Oncethepower is switchedon the washing machinewill automaticallyset the
Nor mal cyclewhich will W ash, Rinse andSpin. If other selectioncombinations
7
SOAK
WASH
RINSE
SPIN
PROCESS
LARGE
MEDIUM
SMALL
WATER
LEVEL
WARM
COLD
TEMP
SELECT
HOT