Filter
Top Products
Trouble-shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending it to
repair. If there are real breakdowns, please come to the
special maintenance department
or after-sale service department of our company. Do not repair it by yourself.
There may be some water flowing out of the drain
hose in the first use of the machine.
It is the water remained in the factory inspection of
performance.
Common phenomena
Phenomena
Explanation
The spinning is intermittent when it starts.
Push the "FUNCTION" button to select "Spin", but it
doesn't work.
In the final spinning, i t stops and displays "Rinse",
and starts water inlet.
Balance the laundries to avoid slanting.
The program is setting the drain time. Some time is
needed before it starts spinning.
It is because that the laundries are slanting to one
side, and the safety switch acts. After water inlet and
stirring,
the slanting will be removed and the
spinning will work.
Phenomena The reason How to settle
In wash/rinse/spin, the machine stops
running. (The "wash" "rinse" "spin"
indicator flash quickly)
The top lid is not closed
Is the drain hose blocked by
foreign material?
Are the laundries put slantingly?
Are the laundries slanting in
spinning?
Is the machine slanting?
Is the machine slanting?
The water faucet is not open
The water inlet valve is blocked
The water pressure is too low and
the current i s too small
Is the jointer screw of the water
inlet hose is loose or twisted awry?
The water faucet leaks
There's abnormal sound inside the
machine
The water filling does not work (the
indicators of "wash" "spin" flash quickly)
The draining does not work, or the
speed of draining is too slow (the
indicators of "wash" "rinse" flash)
The safety switch acts. The spinning
can not
work (the indicators of "wash"
"rinse" flash quickly)
Close the top lid
Clean the foreign material. Open
and close the top lid once.
Re-order the laundries. Close the
top lid.
Level the machine in right
position. Open and close the top
lid once.
Open the water faucet. Push the
"Start/Pause" button
.
Clean the water inlet valve. Push
the "Start/Pause" button.
Wait for the normal water
pressure before use.
Level the machine properly.
Re-order the laundries.
Fasten the jointer screw
properly.
The machine
does not act.
Not wash
Not spin
No water inlet
Is the power plug tightly plugged?
Is the water faucet open?
Have you pushed down the power
switch and Start/Pause button?
Insert the power plug tightly.
Open the water faucet.
Push down the power switch and
Start/Pause button.
Is there power failure?
Is the power plug loose?
Does the water level arrive at the
set water level?
Use it when the power on.
Insert the power plug tightly.
Affusion to the water level.
Is the power plug loose?
Is the top lid closed?
Are the laundries put orderly?
Insert the power plug tightly.
Close the top lid.
Put the laundries orderly.