Filter
Top Products
Total time: including the normal water inlet time, drain time, excluding the power off time. The total
washing time may be influenced by the water inlet pressure and water level.
Spin time: the time from intermittent running to finishing
5 Close the top lid
Three water levels available according to the laundries quantity: High; Medium; Low.
After the water inlet under set water level, if higher water level i s needed, please first
press "START/PAUSE" button, then select needed water level and
press
"START/PAUSE" button. The washing machine will fill water to the new water level.
When selecting "HEAVY" program, high water level are set automatically, no water level
select can be done further.
During operation of wash and rinse program, you can push down "HEAVY" button to
add water. When you release the button, or it reaches the overflow water level, the machine
will stop adding water(IIt will not add water if high water level is selected).
The power will be switched off automatically after the finishing of the washing
If you open the top lid, the machine will stop working except for water filling .
3 Press "WATER LEVEL" button
to select water level
4 Press "START/PA USE " button
6 Washing finished
Time list of each program (minute)
NORMAL
Program
HEAVY
QUICK WASH
Wash (min)
About 12~15 About 56~65About 8
About 8
About 5
About 22~28
About 45~61
About 4~7 About 18~27
Rinse (min/time)
Spin (min)
Total time (min)
Rinse twice times with
stored water, about 28
Rinse twice times with
stored water, about 18
Rinse once with stored
water, about 6
Even there's no water in the tub , the
spinning will start after a certain period.
Do not use the "HEAVY" program for the
woolen laundries.
Wash the laundries that are prone to lose
colors separately from other laundries.
The
pulsator will not rotate unless the
water is filled to selected water level.
Attention
START
PAUSE
WATER
LEVEL