Filter
Top Products
8
OFF
OFF
MAX
OFF
Washing sequence
Spin timer
SPIN TIMER
Wash timer
WASH TIMER
OFF
Figure 4
WASH TIMER
DRAIN
STRONG
STANDARD
WASH SELECTOR
Wash selector
Buzzer
Water-filling entrance
(To set to below 2 minute,
first set to 5 minute then
turn it back. it can increase
the service life of the timer).
(standard current,
strong current)
(The buzzer will ring when
the washing finishes)
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
Water-filling selector
Wash
1.Water-filling selector
Set the water inlet selector at the "WASH" side.
(Figure 1)
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries.
(Figure 4)
6.After washing, the buzzer will ring. Set the "WASH
SELECTOR" at "DRAIN". (Figure 5).
Figure 2
BUZZER
Figure 1
SPIN
WASH
Figure 3
DRAIN
STRONG
STANDARD
WASH SELECTOR
Figure 5
DRAIN
STRONG
STANDARD
WASH SELECTOR