Haier HWM100-828A Washer User Manual


 
How to change the direction of the drain hose
Remarks: in order to make sure of the correct of installation, it is suggested to change the direction of
the drain hose with our company serviceman .
Figure 3
Figure 1
Figure 2
Description of operation button
5 Use the operation button
Flashing, indicating the running program
On, indicating the program about to run or the selection mode
Push and hold the water level button and spin button, then push down the power on/off button .
You can continue setting desired washing procedures. After setting ,push down the start/pause button. The
child lock function is activated. all of the buttons are locked and cannot make selection .
Release the child lock function :push down water level button and spin button at the same time for more 2seconds .
After a beep sound ,the child lock function is released.
The function is intended for children safety and preventing the washing program from accidental changes by children.
Off
FIRST RINSE
SECOND RINSE
THIRD RINSE
MEMORY
BLANKET
CHILD
SPEEDY
STANDARD
COMMON
WOOL
SILK
POWER
ON/OFF
START
PAUSE
AIR DRY
RESERVE
WATER
SOAK WASH
RINSE
SPIN
WATER
LEVEL
Indicator mode and meaning
Child lock function
Push the "POWER" button to switch on the power.
Under power-on mode, push it to switch off the power.
Push the "POWER" button to switch on the power. If the "START/PAUSE" button is not pushed, the machine will
switch off the power automatically after 5 minutes.
POWER
ON/OFF
A "POWER" button
After the power is switched on, press it to start the machine
During working, push it to pause.
During pause, push this button to restart and go on working
START
PAUSE
B "START/PAUSE" button
Washing the relatively big and thick laundries
Washing for the woollen laundries,
STANDARD
Program
Application
Quick washing for normal laundries
under 2.5kg
BLANKET
Standard saving washing for normal laundries
SPEEDY
Washing the relatively big and thick laundries
JEAN
The commom wash , the washing machine
will set to MEMORY program including
"wash, rinse,spin,water value "automatically
last time
MEMORY
Application
Program
WOOL
COMMON
Washing the common laundries
SILK
C "PROGRAM" button
11
PROGRAM
6
1.
as indicated in Figure 1
Lean the machine down gently with the front
surface facing the ground.
2.Dismantle the rear cover of the washing machine.
as indicated in Figure 2
Unhinge clamp
outlet
5.Install Hook of fixing the drain hose and bottom
cover
then lift the machine up gently.
3.Pinch the mouth of drain pipe and take off the
pipe hook.
as indicated in Figure 3
4.Put your hand into the machine and loosen the
clip of drain pipe support then pull inside the pipe
and fetch out from the other side and set it on the
clip, .
10
20
30
40
5
10
15
20
DELAY
REMAIN(MINUTES)
RESERVER(HOURS)
OVERFLOW
1
2
3
3
5
7
9
1
3
5
7
2
4
6
8
Washing the silk laundries