Filter
Top Products
This is an optional item. Fitting the bottom cover reduces the noise, but can be omitted and does not effect the energy or washing
performance of the washer dryer.
WARNING: THIS TASK REQUIRES THE WASHER DRYER TO BE TURNED ON ITS SIDE. THE WASHER DRYER IS VERY HEAVY. RISK OF INJURY.
CAUTION ! This must be done before removing the transportation bolts.
1. Lay protective packing material on the floor and turn the washer dryer on its side.
2. Unscrew the 4 feet.
3. Attach the felt pad to the bottom cover using the double sided tape.
4. Attach the bottom cover by inserting the each foot through the bottom cover into the base of the washer dryer.
5. Screw each foot in but do not tighten fully as once the washer dryer is installed in its final position the feet will require adjustment to
ensue the washer dryer is level.
6. Lift the washer dryer back onto its feet.
INSTALLING THE BOTTOM COVER
plastic
plastic
CAUTION.
spacers