Filter
Top Products
0
9
U
SING THE APPLIANC
E
D ¬ Spinning Speed
Setting Button
_ Touch this button lightly to select the desired speed. When a speed is set, the indicator light
will be light on
E ¬
Strong button _Touch this button lightly, the indicator light will be light on . you can increase the washing time,
rinsing times in main wash stage of the selected program, which is suitable for dirty clothes.
F ¬
Start/Pause Button When the washing machine is connected to the power socket and a program is selected,
lightly touch this button to start operation. During a wash cycle, touch it lightly ,operation
will stop and the indicator light start blinking.Touch it again to resume operation. To cancel
a wash program during a wash cycle, touch his button, when the indicator light start blinking,
press the Power switch, the program will be cancelled.
G ¬
Remianing Time
The column of ‘Time to end’ indicator lights shows the approximate time remaining before the wash
program ends.
If all the lights are off, there is more than 60 minutes before the program ends.
When the 60’ light is on, there is between 60 and 30 minutes to the end of the program.
When the 30’ light is on, it is between 30 and 15 minutes to the end of the program.
When the 15’ light is on, it is less than 15 minutes remaining to the end of the program.
The Stop light will illuminate at the end of the wash program.
Note If all 4 ‘Time to end’ lights flash during a wash program, please refer to the ‘To much foam’
explanation.