Haier HLP21N Washer User Manual


 
English
As a second option, you can install directly to a fixed utility hot and cold water
outlet by using a “Y Hose” (NOT supplied) .
To washer inlet
1. First, remove the aerator from your faucet nozzle and determine the size/type
of the faucet.
2. Once you determine the size/type of the faucet (Outside
Threaded End or Inside Threaded End), place the proper
sized rubber washer into the silver faucet adapter.
3. Attach the silver faucet connector to the faucet.
4. Attach the faucet connector to the water inlet hose and make sure that the
rubber washer is placed in between.
5. Attach the other end of the water inlet hose to the washer water inlet and make
sure that the rubber washer is placed in between.
B
Large
Inside
thread
A
Outside
Thread
Note: Incoming hot water must not exceed 122˚F / 50˚C.
Installing Your Washer
Read the installation instructions carefully and ensure washer location before
beginning.
Installing Quick Sink Adapter:
When installing the quick sink faucet adapter to the faucet, follow the steps
below:
$%
13
Attached hose to water inlet