Filter
Top Products
English
12
Unpacking and Accessories Inventory
Unpacking
1. Remove all packing materials. This includes the foam base and all adhesive tape
holding the washer accessories inside and outside. Slide out and remove the
bottom Styrofoam that is used to protect the washer from shipping damage due
to vibrations and shock.
2. Inspect and remove any remaining packing, tape or printed materials before
using the washer.
Note: The bottom panel is located between the upper foam protec-
tion and box.
Accessories
a) 1 Bottom Panel
b) 8 Screws for the Bottom Plate
c) 1 Water Inlet Hose
d) 1 Drain Hook (Gooseneck)
e) 1 Quick Sink Faucet Adapter
f) 2 Washers
g) 1 Lint Filter
Check to make sure that the accessories are present and in good condition.
If you find that they are not in good condition or are missing, please contact
our customer service department for assistance. Our Toll-Free number is
1-877-337-3639.
a
b
c
e
d
f
g
HLP21E MANUAL 6/20/03 10:03 AM Page 14