CARE AND CLEANING GUIDE
English
9
Warning:
Always unplug your washer to avoid electric shock before cleaning.
Ignoring this warning may result in death or injury. Before using
cleaning products, always read and follow manufacture’s instructions
and warnings to avoid personal injury or product damage.
Cleaning & Maintenance
• Use only damp or sudsy cloth for cleaning control panel.
• To avoid any kind of damage to cabinet finish, wipe washer cabinet as needed.
If you spill liquid/powdered softener, bleach or detergent on the cabinet, wipe
cabinet immediately because it can damage the finish.
• Do not use any abrasive, harsh chemicals, ammonia, chlorine bleach,
concentrated detergent, solvents or metal scouring pads. Some of these
chemicals may dissolve, damage and/or discolor your washer.
• Remove pins or other sharp objects from clothes to prevent scratching of
interior parts.
• Leave lid open after you are done washing to allow inside of washer to dry
and prevent bad odors.
Moving & Vacationing
• Turn off water supply faucet’s and disconnect hoses. Drain water from all
hoses. This will prevent from damaging due to water leakage if the hoses acci-
dentally get ruptured or they become loose.
• Disconnect electrical plug.
• Dry inner wash tub. If moving washer, disconnect drain hose.
• Turn the leveling legs clockwise all the way in.
• Move and store your washer in upright position only.
• To prevent mold or mildew, leave lid open so moisture inside machine can
evaporate.
Storage of Your Washer in Cold Environment
• The washer must be stored at room temperature.
• If you just got delivery of a washer when outside temperature is below freezing,
do not operate until washer has warmed to room temperature.
• Do no install or operate your washer where room temperature is below
freezing.