Filter
Top Products
17
English
• Select a suitable location for the dryer on a hard even surface away from
direct sunlight or heat source e.g. radiators, baseboard heaters, cooking
appliances etc. Any floor unevenness should be corrected with the leveling
legs located on the
bottom of the dryer.
1. Remove all packaging material. This includes the foam base and all adhesive
tape holding the dryer accessories inside and outside.
2. Inspect and remove any remains of packaging, tape or printed materials
before using the dryer.
• Phillips head and flathead screwdrivers
• Channel-lock adjustable pliers
•
1
/2 inch open end wrench
• Carpenter’s level
• Measuring tape (12ft. min.)
• Duct tape
• Rigid or flexible metal 4 inch (10.2 cm) duct
• Vent hood
Tools and Materials Required
INSTALLATION INSTRUCTIONS
Unpacking Your Dryer