Filter
Top Products
English
21
3. Connect the other end to their respective washer inlet located
at the rear of the washer.
Note: Hot water needs to be at a temperature of at least 120˚F – 140˚F.
(49˚C- 60˚C) for the soap to dissolve and to avoid soap residue
remaining on clothes.
4. Using the drain hose clamp, attach the drain hose to the unit as shown
below. Install the drain hose hook to the outer drain hose tube.
5. Plug in the Washer to a regular 115 volt / 60 Hz, 15 amp outlet.