Filter
Top Products
MIN
RINSE button
SPI
N button
Push WATER LEVEL/DISINFECT button to select a
suitable water level.
A.
4 Use the operation buttons
Description of the function of the buttons
Mode and meaning of the indicator light
Flashing: indicate the running program
On: indicate the program about to run, or indicate the selected mode
During operation of programs, it displays the
remained time (minute) or remained times of
the corresponding procedure
Digital tube
Push the RINSE button to set
the rinse procedure.
During STANDARD GENTLE
HEAVY programs,push the RINSE
button to set different rinse times
( 0, 1, 2, 3, 4 times)
During SAVE program,push
the rinse button,the machine have
no reaction
Push the SPIN button to set
the spin procedure.
During STANDARD GENTLE
HEAVY programs,push the
spin button to set different spin
minutes ( 0 9 minites)
During SAVE program,push
the spin button,the machine have
no reaction
After the machine is started, You shall push the START/
-PAUSE button and then push WATER LEVEL/DISINF
-ECT button make new setting.
During SAVE program,WATER LEVEL/DISINFECT
will not be changed.
During operation of wash and rinse program, you can
push down the water level button to add water. When you
release the button, or it reaches the overflow water level,
the machine will stop adding water .
Push WATER LEVEL/DISINFECT over 2
seconds , DISINFECT tube is light;Push
WATER LEVEL/DISINFECT over 2 seconds again,
DISINFECT tube is off and the DISINFECTfunction
is canceled.During the washing maching working,
push START/PAUSE button ,you can make
new selected.
7
10
Off
Check the connection between the water inlet
hose and the water tap
1.Swaying the hose gently to confirm if it is fastened
stable.
2.After installation, open the tap to check if it leaks.
3.Do not bend the hose with overstrain.
4.Before each usage please check if the connection
between the water inlet hose and the water tap, is firm,
so as to prevent dropping from improve Installation
position.
1.Close the water tap.
2. Pull off the water inlet hose from the water tap and washer
Take down the water inlet hose