Filter
Top Products
Install the water inlet hose
6
11
START
PAUSE
POWER
ON/OFF
Pu
sh the POWER ON/OFF b
utton to sw
itch o
n
the p
ower.
Whe
n the po
wer is on,
pus
h
it a
g
ain
to s
witch off
t
he
pow
er.
Push the P
OWER ON/OFF bu
tton to
switch
on
th
ep
ower.
If the S
TART/PAUSE
button
is n
ot
pushed,
the w
a
shing machine wi
ll automa
tically
switch off th
e power
after 5 minu
tes
.
Power On/
Off button
During operation of programs, it displays the remained time (minute).
In case of abnormal phenomenon, it displays the abnormal symbol (see to Page 16)
Wash remain time indicator digitron
The program is selected but not on,It displays the total minutes
of the program
Page16
Start/Pause
button
After the power is switched on, push it to
Start the machine
During working, push it to pause working.
During pause, push it to resume working.
Push the WASH buttonto set the wash
procedure.
During STANDARD GENTLE HEAVY
programs, push theWASH button to set
different wash time (STANDARD from0 to
25minutes GENTLE from 0 to 15
minutes;HEAVY from 30 to 50 minutes or 0
minutes )
During SAVE program, push the WASH
button, the machine have no reaction.
WASH button
PROGRAM SELECTION button
You can select from the following four programs.
Program
STANDARD
HEAVY
GENTLE
SAVE
Normal wash
Large, thick or heavily soiled laundry
Woollen textiles or underwear
10 min quick wash for load below 2 kg
2. Connect the other ends to the water inlet valve .
Water absorption cushion
Jointer of the water inlet hose
Jointer of the
water inlet valve
Figure 1
Figure 2
1. Attach the water inlet hoses to the water faucet. Using pliers, tighten
the coupling. ( As figure 1)
NOTE: Do not over tighten. Damage to the
valves can result.
( As figure 2)