Filter
Top Products
5
Install the Antenna
Select a suitable location for the antenna. This can either be at one side of the front
windscreen, as shown, or a suitable non-opening rear window. Note that the antenna
cable is 2.0m in length. For best results, position the aerial wires 2-3 cms from the edge
of the glass.
Peel the backing off the antenna and attach the antenna to the inside of the window,
ensuring it is clean and dry before you do so. It is only designed to be used once, and if
removed, will not re-adhere to the glass.
Connect the Antenna
Run the antenna lead along the trim so it is not showing if possible, and attach to the
unit by screwing the antenna connector onto the antenna jack on the side of the unit.
Screw it up tightly using fingers only.
Attach mount to the windscreen
Clean the area you have chosen with a dry cloth then peel off the transparent film from
the suction cap. Press the suction cap firmly onto the windscreen and push down the
catch to securely fasten the mount to the windscreen.
Don't Forget! A spanner is not necessary.
1
2
3
Get Going
02