Filter
Top Products
6
vertical steaming
28 Remove wrinkles from hanging clothes, hanging curtains, and
furnishing fabrics.
29 Unplug the iron, and let it cool down, before fitting or removing
the soleplate cover.
30 Move the latch on the underside of the soleplate cover towards
the bristles, to unlock it.
31 Slide the soleplate cover over the soleplate.
32 Move the latch away from the bristles, to lock the soleplate cover
in place.
33 Rest the iron on the end of its handle.
34 Put the plug into the power socket.
35 Turn the thermostat to 5.
36 Wait a minute for the iron to heat up.
37 Check that there’s adequate ventilation behind
the fabric, otherwise moisture may build up,
causing mildew.
38 Check that there’s nothing behind the fabric
that may be damaged by the steam.
39 Check that pockets, turn-ups, and cuffs are empty.
40 Check that there’s water in the reservoir.
41 Use the iron to brush down the fabric, pressing the steam button
every 4 seconds or so.
42 The bristles help concentrate the steam. As you slowly move the
iron from the top to the bottom of the fabric, the wrinkles will
disappear.
43 Check the lint bar periodically, and remove any lint it’s picked up.
44 To remove the soleplate cover:
a) unplug the iron
b) let it cool
c) unlock the latch
d) slide the soleplate cover off the soleplate
after use
45 Unplug the iron, and let it cool down.
46 Hold it over a sink or basin.