Filter
Top Products
OPERAT~G
mSTRUCTIONS
(continued)
How
to Use the Fabric Softener Dispenser
● Position the Fabric Softener ● Do not stop the washer during the
first
spin.
Dispenser on the agitator.
. Pour manufacturer’s
recommended amount
of fabric softener into
a one cup (240 ml)
measuring cup.
\&
This will cause the dispenser to empty too soon.
d.
● Do not use the Fabric Softener Dispenser with
the Soak or PreWash cycle.
Q
● If the dispenser gets clogged, soak it in a
solution of one cup (240 ml) water and one
cup (240 ml) alcohol.
● Add enough water to fill
the cup 1/2 full.
● Pour the diluted softener into the dispenser.
● The fabric softener will automatically be dispensed
at the proper time.
How to Use the Auto Soak Cycle
In the Auto Soak cycle the washer fills, agitates and ● PreWash with Auto Soak: Set the Cycle Selector
soaks for the time you selected. It automatically
knob for soak time desired in the PreWash cycle.
advances into the next cycle.
Start the washer. The washer will agitate, soak and
automatically advance into PreWash.
ENERGY-SAVING
T~S
If your clothes and household items don’t look clean
and fresh after washing, you will probably rewash
them.. and that means you’ll waste energy.
Remember to sort your clothes carefully, and load
them properly, select correct cycles, use enough
detergent and choose a water temperature warm
enough to release and get rid of soil.
● Try to wash less often. Save articles of the same
type of fabric until you have a full load.
● If you must wash smaller loads, adjust the amount
of water. Small loads should have lower water levels.
● Always rinse in cold water. The temperature
of the rinse does not affect cleaning.
●
Wash in off-peak utility hours. Your local utility
can tell you which are the off-peak hours.
● Use your washer’s Normal Spin. This will remove
more water during spin, which will shorten drying
cycle to save more energy.
8