GE WWA8808M Washer User Manual


 
....
~_,
.—=
..
How tousethe
soak cycle
flegular Cycles
OFF
P.PRESS
Soak Cycfe @
@
NORMALSOIL @
HEAW
AUTO~RA RINSE
STARl
~66S0AKCYCLE7’temperature
will automaticallybe cold.
~If hot or warm soak is
desired, set the “WASH/RINSE”
TEMPERATURE switch to
“HOT/COLD” or “WWCOLD”
and turn the Cycle Selectorknob to
“Normal” in the Regular Cycles.
Start the washer. After washer fills
and begins to agitate, push in the
Cycle Selector knob and turn to
“SOAK CYCLE.” Pulloutthe
CycleSelectorknob
tocompletethe
cycle.
oFor
au extetided soak9allow the
washer to f~]land agitate for a few
minutes to dissolve the soaking
agent. Then push in the Cycle
Selector knob to stop the washer
(keep lid closed) and allow to soak
for as long as desired. After
desired soak period, pull out the
Cycle Selector knob to complete
[hc cycle.
gDo not use the Mini”B:tsket tub
with tile soak cycle.
The
Filter-Flopanhastwo
functions:
@LINT FILTER-Position the
Filter-Flo pan on the agitatorafter
loading clothes into the washer.
Lint is easily seen and removed
after the wash is finished.
~LID FOR THE M~I-
BASKET-After loading the
clothes in the Mini-Baskettub, be
sure to replace the Filter-Flo pan.
The pan serves as a lid to keep the
clothes in the Mini-Basket tub.
NOTE: Do not use the Filter-Flo
pan as a wash basket. Do not put
any items to be washed in the
Filter-Flo pan. Do not place
detergent packets in the Filter-Flo
pan.
HOW to use the @
-
Mti”Qlliek cycle- ‘.=-.’.
‘-
The MINI-QUICKcycle is a short
‘______
cycle intendedto wash smallloads
of lightly soiledclothes you need
in a hurry.
Because thiscycle is a shortone
——
for small loads, the Mini-Basket
tub shouldbe used for satisfactory
results.
OFFP.PRESS
Permanent Press
Cle @
a
and Knits Cycles
I
!
& Mini-f?uickCycle
START
~Push the CycleSelectorknobin
:--
and turn it clockwiseto the MINI- ; :
QUICKcycle.
~Pull the Cycle Selector knob to
start the washer.
e -
~=z.
+4:’-
—.—
—.——-—.—-.——-.—.... ... ....... ..=....-————————
—.
.—.———.——..--.—---.... ....