Filter
Top Products
WARNING-To reduce the risk of
fire,
electric shock, or injury to persons when using your
appliance, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
3
Wtiwwd
Wemrlew!
Wfi*/Bi”s*
r.w.
timnt-
:;::
8dKniews
D
“0’””
MEDIUM .
DOEnTLE
@
LARGE
COLD
9
HO1
COLO .
‘~..l,,.
SMALL
4
@
. COLD
II
II
B~KE1
Exti,
Cb#m%
)
@
S*w”@d8TmSp8adWati8rtiti~n,w,d
NLL”.OB,,
,,”BT
W3”
T03T.F
Hea~Duv
Ertra
Laqe
CapaciW
—Q
e
@
@
9
C.(,t]trc)l
pcinelup[)ecircln(e
tnu),
~,ciq.
slightly.
Sorting and Loading
● Sort clothes carefully by fabric
type, weight, color and amount
of soil, according to instructions
in How to Sort Clothes section.
● Remove the
Filter-Flo pan
and Mini-
Basket tub.
The underside
of the lid is a
good place to put the pan while
loading or unloading clothes.
Do not use the Mini-Basket tub
when washing regular loads.
You’ll find complete details on
how and when to use it in How to
Use the Mini-Basket Tub section.
●
Add measured amount of detergent.
See Detergents, Other Additives
section for information on detergents
and other laundry additives.
●
Load clothes into wash basket,
being careful not to overload.
Clothes should be below retaining
ring. See How to Load Your Washer
section for more information.
●
Position the Filter-Flo pan on
the agitator. Lint will collect in
the pan for easy removal when
the wash is finished.
Do not use the Filter-Flo pan as a
wash basket.
Do not put any items
to be washed in the Filter-Flo pan.
● See How to Use Bleach
Dispenser section for information
on the Bleach Dispenser.
. For information on bleaches
and fabric softeners, see Other
Laundry Products section.
●
Close the lid. Washer will fill but
not agitate or spin with the lid open.
Setting the Controls
Use the Controls Setting Guide to help you make the
@
proper selections.
~
Select
WasMSpin
Speed.
o
~
Select Water Level.
SMALL:
Washer is less than 1/2 full of clothes.
MEDIUM: Between 1/2 and 2/3 full.
LARGE: Over 2/3 full.
MINI-BASKET: Not used for regular loads.
See How to Use the Mini-Basket Tub section.
O
Select
WasMRinse
Temperature.
Push Cycle Selector knob in and turn clockwise to
your selected wash setting.
Pull Cycle Selector knob
out to start the washer.
~
START ,
If you wish to change
setting after washer
has started, push Cycle
Selector knob in to stop
9
,L
STOP
~
the washer and reset to the
new position. Setting
can
be changed
at
any time.
5