Filter
Top Products
HOW TO OPERATE YOUR WASHER
WARNING—TO
reduce the risk of fire, electric shock, or injury to persons,
read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
COLD
“o,(’)
-
WARM
@
Wash Temperature
Water Level
Del;cate
0FF18 ,2
Regular
9
Q
Set the controls
See the Controls Setting
Guide,
~
Select Wash Temperature. Cold rinse will be
~
Push Cycle Selector in andtum clockwise to
your selected wash cycle.
automatically provided with all cycles.
~
Select Water Level.
@ Pull Cycle Selector out to start the cycle.
NOTE :
If you wish to
change
cycle setting after
SMALL: Washer is less than 1/3 full of clothes.
washer has started, push Cycle Selector in and wait
MEDIUM: Between 1/3 and 2/3 full.
for washer to stop. Then reset to the new position.
LARGE: Over 2/3 full of clothes.
Setting can be changed at any time during the
Perm
Press or Regular cycle.
Self-cleaning lint filter
The lint filter needs no attention from you. Lint collected during
washing and rinsing of clothes is automatically flushed down
the drain.
How to soak in the washer
Set wash temperature control. Add detergent or soak agent. Turn Cycle Selector to
desired cycle. Start the washer. After washer fills and begins to agitate, push in the Cycle
Selector to stop washer. Allow to soak, turn to the last Spin. Pull out the Cycle Selector to complete the cycle.
Delicate Cycle
To
get
the full benefit of the Delicate Cycle, always
set the Indicator at the beginning of the cycle. During
wash, the Delicate Cycle alternates between agitation
and pause, to protect delicate clothes.
Del;cate
OFF 48
,2
.,,”/
1
‘ ‘
;
RINSE
SPIN
(~>
~
START
-
8