Filter
Top Products
SIGNAL
Alerts you that the cycle is complete. The beeper will continue to sound every two
minutes for the next 6 minutes, until the clothes are removed. The clothes should
be removed when the beeper goes off so wrinkles won’t set in.
On some models, press
SIGNAL
to turn the beeper on or off.
On some models, press
SIGNAL
to select low or high volume, or to turn the beeper off.
EXTEND TUMBLE
Minimizes wrinkles by adding approximately 20 minutes of no-heat tumbling after
clothes are dry. The beeper will sound every 90 seconds to remind you to remove
the clothes. The
EST. TIME REMAINING
display will show
00
.
ANTI-BACTERIAL
This option can only be used with the
COTTONS
or
MIXED LOADS
cycles.
This option reduces certain types of bacteria by 99.9%, including:
and The anti-bacterial process
occurs when high heat is used during a portion of the drying cycle.
NOTE:
Do not use this cycle on
delicate
fabrics.
* The Anti-Bacterial Cycle is Certified by NSF International (formerly National Sanitation
Foundation) to NSF Protocol
P9 Sanitization Performance of Residential Clothes Dryers.
NSF
®
NSF Protocol P9
Sanitization Performance of
Residential Clothes Dryers
DELAY 1-8 HOURS
Use to delay the start of your dryer for 1 to 8 hours. First choose your dry cycle and
any options. Then press this pad for the number of hours you want to delay the cycle.
Press the
START
pad to start the countdown.
The countdown time will be shown in the
Est. Time Remaining
display.
NOTE:
If the door is opened while the dryer is in
DELAY
, the dryer will beep once a
minute to remind you to restart the countdown. The countdown time will not restart
unless the door is closed and
START
has been pressed again.
DAMP SIGNAL
This option causes the dryer to beep when clothes have reached a damp dryness.
Remove items that you wish to hang dry. The
DAMP SIGNAL
will only beep when the
dryer
SIGNAL
is turned on.
WARM UP
This option provides 10 minutes of warming time to warm up clothes. Perfect for use
on a cold day, or to warm towels or robes.
15
ABOUT CYCLE OPTIONS
Operating Instructions